$189.99
Product Price & availability are accurately updated at the time of product imported from Amazon & are subject to change. Any price and availability information display on Amazon at the time of purchase will apply to the purchase of this product.
✅[Lossless Audio & low Interference] latest wireless audio technology that supports 5.2 & 5.8GHz dual-band selectable digital wireless with an advanced total 106 RF channel auto selection, to avoid the WiFi interference with your 5G network, for near lossless audio and provides excellent transmission stability
✅[Easy Connection with A/V Receiver System] comes with Speaker Line Level Input and Stereo RCA Input that can receive full band audio from any audio amplifier, A/V receiver or preamp.
✅[High Efficiency Amplifier Built-In] 2 x 50W RMS @ 4 ohms load Class D amplifier, allow you to connects directly to any passive bookshelf or the rear surround sound loudspeakers.
✅[An additional subwoofer connection] provides an additional subwoofer mono input and output, for connecting between AV Receiver and Power/Active Subwoofer Speaker or Subwoofer Amplifier.
✅[Wide Transmission Range] – Up to 100 ft (30M) operational distance between transmitter and receiver (line of sight) with 24-bit 48KHz full CD quality high resolution/uncompressed audio.
The WSA-5RP providing premium-quality audio for stereo audio applications operating in the 5.2G/5.8GHz bands with 2 x 50W low-hear class D amplifier built-in. Simply connect the transmitter module to you’re A/V processor and the receiver to your passive bookshelf / rear surround sound speakers and powered/active subwoofer
| Package Dimensions | 9.53 x 8.9 x 4.96 inches |
|---|---|
| Item Weight | 3.23 pounds |
| ASIN | B09JKCQH6Z |
| Best Sellers Rank | #13,813 in Electronics (See Top 100 in Electronics) #20 in Surround Sound Systems |
| Date First Available | October 15, 2021 |
| Manufacturer | DYNASTY PROAUDIO |
elfclick.com is an online store where you can find the best Amazon Products. elfclick.com may contain affiliate links where the advertiser/creator earns a commission if you purchase the product.
We also invite sellers to display their products using our platform. We are offering the service for product display for free of cost.
Amazon Customer –
I’ve been waiting for a solution like this for years. I’ve purchased other wireless transmitters and receivers designed to serve this purpose and they all had issues with connection reliability. This solutions is very well built and it works very well. It’s great that it supports both 2 speakers amplified and a subwoofer and that it has 2 frequencies you can experiment with in case one does work best for you although the default setting has worked perfectly for me.
Review guy –
I got new floors…I went from carpet to hardwood so I couldn’t hide my cables around the perimeter like I had done before. I thought I would just sacrifice my rear speakers…which I did for a while (3 weeks). I looked around and couldn’t really find too many options. But then this appeared on Amazon…I thought…that’s a lot of money for something I don’t know will work. I thought I’ll take a big chance and buy 2 to go for a 7.1 surround sound. I can’t believe it actually works…and really good! I highly recommend. You basically just hook up the in’s and out’s and power. That’s it. No pairing or apps. It just works!
Riley –
First off before buying a wireless speaker kit you need to check if your reciever has the option for preamp outputs. Usually only high end recievers do but if yours has preamp outputs dont get this kind of speaker kit get an rca wireless audio kit (pro audio makes one and it’s on amazon). You can get one with the left and right channel inputs/outputs or a single one then use y splits if you need to. Preamp outputs are those red and white rca cables if you dont know what I’m talking about. Using preamps to do your wireless speakers not only is better audio quality wise but will also give you the option to get your own 2 channel amp with your desired wattage per speaker. My reciever unfortunately doesn’t have preamp speaker outputs so I this is the kit I had to go with.This kit will be the third and most expensive wireless rear speaker kit I’ve bought. I’ve tried 2 other brands one of which was the rocketfish kit from bestbuy. It was worked okay but at only 25 watts per speaker it just didnt get loud enough and had some serious clipping/crackling problems when playing at high volume. If you have cheap speakers 25 watts might be enough but my speakers are rated 20-150 watts so 25 just is not enough. The dynasty kit being the most expensive is worth just for the fact that you get 50 watts per speaker and the option to hook up a subwoofer. So far I haven’t had any issues with connectivity and my 2.4g/5g router sits a couple feet away from the transmitter. Most routers nowadays will automatically switch to the least crowded 5g band so if you have issues with connectivity you really should check your router settings and either change channel bands manually or check that auto channel is enabled which most are enabled by default. Another thing I noticed with this kit which other people mentioned is random popping noises. I had issues with popping or crackling noises on every single wireless speaker kit I bought inclusing this one and it mostly happens when playing at high volume or during intense scenes. I think the problem is with the input end. If you’re reciever is sending too much power to the transmitter I think that’s what causes the popping or crackling noises. What I did on all of my wireless kits to get rid of the popping noises is raise the volume all the way up on the output/amp end of your kit then use your receivers auto calibration to adjust and lower the volume to the rear speakers. This will hopefully lower the output from your reciever to the transmitter. Now this will vary depending on your reciever and how many watts it puts out per channel which is probably why only some people have issues with popping noises. If you try that and it doesnt get rid of the popping noises you will need to manually adjust your rear speaker volume from your reciever until the noises disappear. My reciever puts out 80 watts per channel and my calibration put my rear speakers at around -3db and I got no more popping noises. As far as sound quality goes this kit is excellent. Very clear and less static than my rocketfish kit. One thing I highly recommend for any home theater is getting noise filter clips that you snap onto your wires to reduce noise/static. I got a variety pack of them on amazon for 15 bucks and trust me it helps A LOT especially with these wireless kits. Almost completely removes static noises from your speakers. All you do is snap them onto your power cord lines on your reciever, subwoofer, speaker kits etc. If you have issues with humming from your speakers or you hear static in your speakers then is is an absolute must. Last thing i noticed with this kit is the delay which was double that of my rocketfish kit. This should not be a problem in most cases however in some cases for example when I stream a movie through my tv only the audio gets sent back through hdmi to my reciever which will take that audio and adjust for the year speaker delay which causes some very serious lip sync issues. This can be adjusted for manually in my tv and or reciever but it is annoying. If your video sources pass through your reciever then to your tv then you shouldn’t have any problems with this.I spent a lot of time and money trying to find the kit and I tried to include as much helpful information here as I could. Hopefully this helps someone because i know there’s a lot of people out there that are frustrated with the lack of options for wireless speaker kits like I was.Pros:1) Best option on the market currently for recievers without preamp outputs2) 50 watts per speaker3) Clear sound4) Easy setup5) Optional speaker/and or sub configurationCons:1) Expensive2) White color box doesnt blend well with most home theaters. There should be a choice for black.3) Issues with popping at high volumes. Adjustments needed to mitigate this problem.
Joe E. –
I have a 7.2.2 Martin Logan set, and I don’t have the option to run cabling to the back wall, but I was hesitant to use another wireless kit after trying out the Rocketfish one from Best Buy, as there were a lot of crackling noises and pops, and the sound was just not there. This set turns out to be great for what I need it for, which is driving the rear speaker surround. The speaker can handle up to 250 watts, but the proaudio amp handles it just fine. I am using banana plugs from Amazon, and they’re just so easy to connect. The system recognized each other automatically, and there seems to be no interference.I am very pleased with this purchase, and very surprised as to how good it sounds.
Robert A. Bimson –
This kit resolved a problem for us. We had no wall to put rear speakers in and didn’t want to run wires across a carpet (concrete slab floor underneath). When we got the Dynasty, it was impressive how robust it looked and felt. The installation instructions were clear and easy — somewhat intuitive if you’ve ever wired your own stereo stuff. The transmitter sits on the TV stand, plugged in to an AC outlet, with speaker wires coming into it from the A/V Receiver rear speaker terminals. The receiver sits across the room next to a couch hidden by an end table (see photo). It, too, is plugged in to an AC outlet. The speaker wires go from it to the speakers on stands on either side of the room. The transmitter and receiver immediately paired. My A/V Receiver uses a microphone to calibrate the 5.1 system for ideal balance. Done. The sound is excellent (and I’m fussy).
All the toys –
I moved into my present home almost 3 years ago. The hardwood floors and a second story, above, prevented my running wires to my MK surround speakers I had used in my last two homes. I had been looking for a wireless transmitter-receiver with power for the surround speakers without finding something that looked like it would work well. This system does the job perfectly!!! I used rca cables to connect the transmitter line-in l&r to the preamp surround l&r output rather than the speaker connections. Those patch cables don’t come with this package. I even used the supplied speaker cables to connect my surround speakers to the receiver. The receiver has a rheostat to control the balance between the front speakers and the surround speakers which didn’t supply a sufficient load to the surround speakers for my ears so I further adjusted the balance with the controls on my Yamaha AV receiver. Just make sure you use the right output on your AV receiver for the line-in on the transmitter otherwise you won’t have any sound on the surround speakers. The volume control on your AV receiver will control the overall sound through all of the speakers including the surround. You don’t have to turn off the transmitter and receiver just leave them on all of the time.
Jerry –
I just hooked it to my Denon AVR-X2700H receiver with full Polk Audio 5.1 speakers setup, placed the wireless receiver behind my sofa near the back wall and it works perfectly.The pairing is easy, just follow the manual and get it done by few second, once the transmitter and receiver to link them together then you can move away from each other to the right position.I didn’t use the 5.2G mode since the 5.8G works fine with my application, I didn’t notice any delay or interference during the audio playback, and my 5G WiFi network still stay in good signal with full bar.The wireless receiver has a built-in powerful amplifier, easy to drive my Polk Audio T15 bookshelf speakers with great volume to match the sound balance with front and center speakers.The additional subwoofer in & output is PLUS feature for this product, I can run total 3 speakers wirelessly at the same time on this device.Thanks for this excellent product with great quality and design, I don’t need to run a cable all around the room anymore.
Richard Bulzacchelli –
When I moved to a new house, I lost my surround sound wiring, so I was looking for a solution that didn’t involve hiring a professional or having to do surgery on my walls and ceilings and then having to patch and repaint. Bluetooth could introduce a delay, which, for surround sound, is very bad. This device really does work for installing rear speakers into a system without running wires through walls and ceilings, or MUCH WORSE, over the floor. I haven’t listened to it as an audiophile yet, but I can say that it sounds good. I don’t hear signal noise and I don’t hear distortion and I don’t hear ANY delay between the speakers attached to the included amplifier and the mains.The special feature of this system is that the transmitter can be wired to a receiver’s or amplifier’s SPEAKER outputs, which is pretty essential for using to add a rear channel setup in a multichannel system (5.1, 7.1, etc.) Without that feature, you would have to find a way to transform the amplified signal into an unamplified signal–not impossible, but it would require additional special equipment. If you tried to use an HDMI splitter and then capture the audio from the signal, and then make sure you separated out the channels you needed (which would also require additional special equipment), you would then have to adjust the volume of your rear speakers independently of your mains every time you changed the volume on your receiver. That would be a nightmare.BUY THIS SYSTEM. It’s the solution to that problem. There may be others but I know this one works, and it works well.One problem I encountered in setup, which could have been specific to my receiver, was that my receiver didn’t immediately recognize that I’d attached rear speakers once I hooked this system up and powered it on. I had to go into my receiver and manually tell it that those speakers were there. But once I did that, it worked.Yes, I recommend this product.
Rick Deckard –
What I needed is a solution to make my surround speakers wireless to avoid running many feet of cabling along the floor. If that’s all you need as well, look no further and add to cart. This handy setup worked flawlessly out of the box and for all practical purposes is audibly indistinguishable from a wired setup; it really is that good. The ability to run your LFE signal through this as well and position your subwoofer in the back of the room near the surrounds is a cool perk and one I may take advantage of in the future.The one con as noted in other reviews is that the transmitter only has spring-lock speaker connectors while the receiver is totally different with screw-posts that support banana plugs; a weird design choice but it makes zero difference in performance.
Homer –
I guess if you hire a guy, it could cost $250 to run the wires. I didnt want to spend 4 hours running wires either. This was a simpler solution. The power is only 50 watts, compared to my reciever at 90. I have not had any issues yet. But I keep the surround speakers lower and I use satelite speakers, so I dont think it requires a lot of power.Should I be wrong, I will update the review.I’m a little surprised that this was the only product I could find. I would think there would be a least 10 other products out there. I’m also surprised the major players dont do something like this and integrate with their system. They are missing out on an oppurtunity.